耳机网-耳机大家坛

标题: 数码视讯Q5刷armbian+squeezelite [打印本页]

作者: cqzhangjunhua 时间: 2022-5-8 11:55
标题: 数码视讯Q5刷armbian+squeezelite
本帖最后由 cqzhangjunhua 于 2022-5-8 11:55 编辑

数码视讯Q5刷armbian+squeezelite

数码视讯Q5机顶盒介绍：

数码视讯Q5
CPU：晶晨S905M  4核1.5G
内存：1g
存储：8G
显卡：Mali-450
接口：HDMI
   USB2.0（两个）
   AV
   TF卡槽
   RJ45（1000M）

带2.4无线
电源：DC12V 1A

目前闲鱼的售价在：50-70元。

购买数码视讯Q5时，必须问清楚，是否可以插tf卡打游戏，可以插tf卡打游戏才买，可以插tf卡打游戏才买，可以插tf卡打游戏才买，

以下是所需软件下载链接
链接：https://pan.baidu.com/s/1q2n-Tc-5JCwvHitMHXswpQ 提取码：cqzz

一.首先安装和设置armbian

1.1.镜像文件：
   armbian_5.44_S9xxx_Ubuntu_bionic_3.14.29_server_20180729.img

1.2.将镜像文件写入tf卡

   在windows上用DiskGenius将tf卡分区格式化

   首先在DiskGenius左方框中选择要分区的tf卡，要选正确、要选正确、要选正确（重要的事提醒三次），右键点击，弹出菜单，选择“快速分区”，在弹出的快速分区框，选择分区类型：MBR；选择分区数目：自定义1个分区；在右上方的高级设置选FAT32，然后点击“确定”按钮。等到完成后，关闭DiskGenius。

   打开Win32DiskImager，这时头上方的“设备”栏里有tf卡的盘符，盘符如果正确就不管了（如果只有一个tf卡插在电脑上，只要显示盘符就可以不管，否则要选正确的盘符）。点击“映像文件”栏右边的文件夹符号，选择要写进tf卡的img文件，文件选好后，“任务进度”条下面的“写入”按钮可见，点击“写入”按钮，开始写入，等到写完时会弹出“写入完成”框，点击“OK”按钮，退出Win32DiskImager。

1.3.启动armbian

   将tf卡插入数码视讯Q5的TF卡槽里，插上网线、电源线，按下电源开关。打开浏览器，登录路由器的管理页面，查看新增的设备名称和IP地址。（一般显示的设备名称为：aml）

1.4.设置armbian

   打开PuTTY，在HostName(or IP address)栏里，填入数码视讯Q5的IP地址(192.168.X.XXX)，然后点击“Open”按钮，弹出“PuTTY Security Alert”提示框，点击“是(Y)”按钮，弹出“192.168.X.XXX-PuTTY”窗口，窗口
   显示：
   login as:
   输入：root
   显示：
   root@192.168.X.XXX's password:
   输入：1234
   显示：

login as: root
root@192.168.2.43's password:
You are required to change your password immediately (root enforced)
____  ___
/ ___|/ _ \__  ____  ____  __
\___ \ (_) \ \/ /\ \/ /\ \/ /
___) \__, |>  <  >  <  >  <
|____/  /_//_/\_\/_/\_\/_/\_\

Welcome to ARMBIAN 5.44 user-built Ubuntu 18.04.1 LTS 3.14.29
System load: 1.10 0.75 0.33 Up time:    3 min
Memory usage:  10 % of 766MB IP:          192.168.2.43
Usage of /: 3% of 29G

New to Armbian? Check the documentation first: https://docs.armbian.com
Changing password for root.
(current) UNIX password:
输入root的旧密码：1234
Enter new UNIX password:
输入root的新密码：
Retype new UNIX password:
再次输入root的新密码：
显示：
Thank you for choosing Armbian! Support: www.armbian.com

Creating a new user account. Press <Ctrl-C> to abort

Please provide a username (eg. your forename):
输入将要创建的新用户名：
Enter new UNIX password:
输入新用户的密码：
Retype new UNIX password:
再次输入新用户的密码：
Full Name []:
回车
Room Number []:
回车
Work Phone []:
回车
Home Phone []:
回车
Other []:
回车
Is the information correct? [Y/n]
输入：y
然后系统重启，关闭PuTTY。

重新运行PuTTY，输入root，输入root的新密码，
显示：
login as: root
root@192.168.2.43's password:
____  ___
/ ___|/ _ \__  ____  ____  __
\___ \ (_) \ \/ /\ \/ /\ \/ /
___) \__, |>  <  >  <  >  <
|____/  /_//_/\_\/_/\_\/_/\_\

Welcome to ARMBIAN 5.44 user-built Ubuntu 18.04.1 LTS 3.14.29
System load: 2.22 0.94 0.35 Up time:    2 min
Memory usage:  17 % of 766MB IP:          192.168.2.43
Usage of /: 4% of 29G

[ General system configuration (beta): armbian-config ]

Last login: Sun Feb  6 03:40:16 2022 from 192.168.2.25

root@aml:~#

二.更新系统

apt-get update

apt-get upgrade

出错提示
E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?

解决方法：
输入：ps -A | grep apt
显示
3907 ?       00:00:00 apt.systemd.dai
3911 ?       00:00:00 apt.systemd.dai
输入：kill -SIGKILL 3907
输入：ps -A | grep apt
显示
3XXX ?       00:00:00 apt.systemd.dai
3XXY ?       00:00:00 apt.systemd.dai
输入：kill -SIGKILL 3XXX
输入：ps -A | grep apt
显示没有

输入：reboot

系统重启，等几分钟后登录。

apt-get upgrade

三.安装squeezelite

wget http://mirrors.ustc.edu.cn/debian/pool/main/s/squeezelite/squeezelite_1.8-4_arm64.deb

dpkg -i squeezelite_1.8-4_arm64.deb

出错提示

dpkg: dependency problems prevent configuration of squeezelite:
squeezelite depends on libavcodec57 (>= 7:3.2) | libavcodec-extra57 (>= 7:3.2);                                                                                                                                                             however:
  Package libavcodec57 is not installed.
  Package libavcodec-extra57 is not installed.
squeezelite depends on libavformat57 (>= 7:3.2); however:
  Package libavformat57 is not installed.
squeezelite depends on libavutil55 (>= 7:3.2); however:
  Package libavutil55 is not installed.
squeezelite depends on libfaad2 (>= 2.7); however:
  Package libfaad2 is not installed.
squeezelite depends on libflac8 (>= 1.3.0); however:
  Package libflac8 is not installed.
squeezelite depends on libmad0 (>= 0.15.1b-3); however:
  Package libmad0 is not installed.
squeezelite depends on libmpg123-0 (>= 1.10.0); however:
  Package libmpg123-0 is not installed.
squeezelite depends on libsoxr0 (>= 0.1.0); however:
  Package libsoxr0 is not installed.
squeezelite depends on libvorbisfile3 (>= 1.1.2); however:
  Package libvorbisfile3 is not installed.

dpkg: error processing package squeezelite (--install):
dependency problems - leaving unconfigured
Processing triggers for systemd (237-3ubuntu10.53) ...
Processing triggers for man-db (2.8.3-2ubuntu0.1) ...
Errors were encountered while processing:
squeezelite

解决方法：

apt --fix-broken install

输入squeezelite -？

显示

root@aml:~# squeezelite -?
Squeezelite v1.8, Copyright 2012-2015 Adrian Smith. See -t for license terms
Usage: squeezelite [options]
  -s <server>[:<port>]  Connect to specified server, otherwise uses autodiscovery to find server
  -o <output device> Specify output device, default "default", - = output to stdout
  -l                   List output devices
  -a <b>:<p>:<f>:<m> Specify ALSA params to open output device, b = buffer time in ms or size in bytes, p = period count or size in bytes, f sample format (16|24|24_3|32), m = use mmap (0|1)
  -a <f>             Specify sample format (16|24|32) of output file when using -o - to output samples to stdout (interleaved little endian only)
  -b <stream>:<output>  Specify internal Stream and Output buffer sizes in Kbytes
  -c <codec1>,<codec2>  Restrict codecs to those specified, otherwise load all available codecs; known codecs: flac,pcm,mp3,ogg,aac,wma,alac,dsd (mad,mpg for specific mp3 codec)
  -C <timeout>       Close output device when idle after timeout seconds, default is to keep it open while player is 'on'
  -d <log>=<level>    Set logging level, logs: all|slimproto|stream|decode|output|ir, level: info|debug|sdebug
  -e <codec1>,<codec2>  Explicitly exclude native support of one or more codecs; known codecs: flac,pcm,mp3,ogg,aac,wma,alac,dsd (mad,mpg for specific mp3 codec)
  -f <logfile>       Write debug to logfile
  -i [<filename>]    Enable lirc remote control support (lirc config file ~/.lircrc used if filename not specified)
  -m <mac addr>       Set mac address, format: ab:cd:ef:12:34:56
  -M <modelname>       Set the squeezelite player model name sent to the server (default: SqueezeLite)
  -n <name>          Set the player name
  -N <filename>       Store player name in filename to allow server defined name changes to be shared between servers (not supported with -n)
  -p <priority>       Set real time priority of output thread (1-99)
  -P <filename>       Store the process id (PID) in filename
  -r <rates>[:<delay>]  Sample rates supported, allows output to be off when squeezelite is started; rates = <maxrate>|<minrate>-<maxrate>|<rate1>,<rate2>,<rate3>; delay = optional delay switching rates in ms
  -R -u [params]       Resample, params = <recipe>:<flags>:<attenuation>:<precision>:<passband_end>:<stopband_start>:<phase_response>,
                     recipe = (v|h|m|l|q)(L|I|M)(s) [E|X], E = exception - resample only if native rate not supported, X = async - resample to max rate for device, otherwise to max sync rate
                     flags = num in hex,
                     attenuation = attenuation in dB to apply (default is -1db if not explicitly set),
                     precision = number of bits precision (NB. HQ = 20. VHQ = 28),
                     passband_end = number in percent (0dB pt. bandwidth to preserve. nyquist = 100%),
                     stopband_start = number in percent (Aliasing/imaging control. > passband_end),
                     phase_response = 0-100 (0 = minimum / 50 = linear / 100 = maximum)
  -D [delay]          Output device supports DSD over PCM (DoP), delay = optional delay switching between PCM and DoP in ms
  -v                   Visualiser support
  -L                   List volume controls for output device
  -U <control>       Unmute ALSA control and set to full volume (not supported with -V)
  -V <control>       Use ALSA control for volume adjustment, otherwise use software volume adjustment
  -z                   Daemonize
  -t                   License terms
  -?                   Display this help text

Build options: LINUX ALSA EVENTFD RESAMPLE FFMPEG VISEXPORT IR DSD LINKALL

则表示squeezelite安装成功

四.设置squeezelite

将USB解码器用USB线同数码视讯Q5连接上

用squeezelite -l查看USB解码器的编号

显示

root@aml:~# squeezelite -l
Output devices:
  null                         - Discard all samples (playback) or generate zero samples (capture)
  default:CARD=HAP90SD          - TEAC HA-P90SD, USB Audio - Default Audio Device
  sysdefault:CARD=HAP90SD       - TEAC HA-P90SD, USB Audio - Default Audio Device
  front:CARD=HAP90SD,DEV=0    - TEAC HA-P90SD, USB Audio - Front speakers
  surround21:CARD=HAP90SD,DEV=0  - TEAC HA-P90SD, USB Audio - 2.1 Surround output to Front and Subwoofer speakers
  surround40:CARD=HAP90SD,DEV=0  - TEAC HA-P90SD, USB Audio - 4.0 Surround output to Front and Rear speakers
  surround41:CARD=HAP90SD,DEV=0  - TEAC HA-P90SD, USB Audio - 4.1 Surround output to Front, Rear and Subwoofer speakers
  surround50:CARD=HAP90SD,DEV=0  - TEAC HA-P90SD, USB Audio - 5.0 Surround output to Front, Center and Rear speakers
  surround51:CARD=HAP90SD,DEV=0  - TEAC HA-P90SD, USB Audio - 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
  surround71:CARD=HAP90SD,DEV=0  - TEAC HA-P90SD, USB Audio - 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
  iec958:CARD=HAP90SD,DEV=0    - TEAC HA-P90SD, USB Audio - IEC958 (S/PDIF) Digital Audio Output
  dmix:CARD=HAP90SD,DEV=0       - TEAC HA-P90SD, USB Audio - Direct sample mixing device
  dsnoop:CARD=HAP90SD,DEV=0    - TEAC HA-P90SD, USB Audio - Direct sample snooping device
  hw:CARD=HAP90SD,DEV=0       - TEAC HA-P90SD, USB Audio - Direct hardware device without any conversions
  plughw:CARD=HAP90SD,DEV=0    - TEAC HA-P90SD, USB Audio - Hardware device with all software conversions

也可以用cat /proc/asound/cards命令查看USB解码器

cat /proc/asound/cards

显示
1 [HAP90SD       ]: USB-Audio - TEAC HA-P90SD
                  TEAC CORPORATION TEAC HA-P90SD at usb-c9000000.dwc2_a-1, high speed

nano /etc/rc.local

   将以下命令写入文件（必须在exit 0之前）

/etc/rc.local全部内容：

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

squeezelite -o hw:1,0 -D dop -p 99 -b 4096:6892

#/boot/fan.sh &
exit 0

保存退出

重启服务：systemctl restart squeezelite

重新启动系统，这样不必每次输入命令。

安装好squeezelite后，就可以玩DAPHILE+squeezelite双机，也可以玩logitechmediaserver+squeezelite双机。

我目前的双机是我家云刷armbian+logitechmediaserver和数码视讯Q5刷armbian+squeezelite组成的双机，我发现这套arm硬件组成的双机系统，比x86硬件装DAPHILE+数码视讯Q5安装squeezelite组成的双机更好听。

作者: grrr 时间: 2022-5-8 12:16
很强

作者: shush0206 时间: 2022-7-19 18:35
本帖最后由 shush0206 于 2022-7-19 18:36 编辑

你这个步骤，应该Q5先刷为安卓才可以吧？

作者: cqzhangjunhua 时间: 2022-7-19 20:10

shush0206 发表于 2022-7-19 18:35
你这个步骤，应该Q5先刷为安卓才可以吧？

购买数码视讯Q5时，必须问清楚，是否可以插tf卡打游戏，可以插tf卡打游戏才买，可以插tf卡打游戏才买，可以插tf卡打游戏才买，

作者: shush0206 时间: 2022-7-26 10:48
我ssh指定了USB dac
root@DietPi:~# squeezelite -o hw:CARD=R5,DEV=0
可以出声音

如何保存上面的设置？保证重启后还是usb输出？
请教下怎么敲命令！

作者: cqzhangjunhua 时间: 2022-7-27 08:21

shush0206 发表于 2022-7-26 10:48
我ssh指定了USB dac
root@DietPi:~# squeezelite -o hw:CARD=R5,DEV=0
可以出声音

nano /etc/rc.local

将以下命令写入文件（必须在exit 0之前）

/etc/rc.local全部内容：

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

squeezelite -o hw:1,0 -D dop -p 99 -b 4096:6892

#/boot/fan.sh &
exit 0

保存退出

重启服务：systemctl restart squeezelite

重新启动系统，这样不必每次输入命令。

作者: cqzhangjunhua 时间: 2022-7-27 08:22

shush0206 发表于 2022-7-26 10:48
我ssh指定了USB dac
root@DietPi:~# squeezelite -o hw:CARD=R5,DEV=0
可以出声音

作者: shush0206 时间: 2022-7-27 08:52

cqzhangjunhua 发表于 2022-7-27 08:22
nano /etc/rc.local

将以下命令写入文件（必须在exit 0之前）

感谢你的指点。

作者: shush0206 时间: 2022-8-15 16:45
楼主太强大了。再请教一下

如果所有软件的sound output 都选择USB-DAC

在armbianl里面怎么一次性设置好？
拜托！

作者: cqzhangjunhua 时间: 2022-8-15 19:03

shush0206 发表于 2022-8-15 16:45
楼主太强大了。再请教一下

如果所有软件的sound output 都选择USB-DAC

用cat /proc/asound/cards命令查看USB解码器

cat /proc/asound/cards

显示
1 [HAP90SD       ]: USB-Audio - TEAC HA-P90SD
                  TEAC CORPORATION TEAC HA-P90SD at usb-c9000000.dwc2_a-1, high speed

这是我的系统和USB DAC的设备代号。

squeezelite的命令如下

squeezelite -o hw:1,0 -D dop -p 99 -b 4096:6892

说明：命令中的-o hw:1,0  就是USB DAC设备的代号。

nano /etc/rc.local

   将以下命令写入文件（必须在exit 0之前）

/etc/rc.local全部内容：

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

squeezelite -o hw:1,0 -D dop -p 99 -b 4096:6892

#/boot/fan.sh &
exit 0

保存退出

重启服务：systemctl restart squeezelite

重新启动系统，这样不必每次输入命令。

作者: qdatmjxb 时间: 2024-2-29 18:43
谢谢，两年前的贴子翻出来还能搞定，谢谢楼主。

欢迎光临耳机网-耳机大家坛 (http://www2.erji.net/)