|
|
The latest Poly firmware version is 1.0.26. You can confirm the firmware version of your Poly by navigating to Access Point Mode and scrolling to the bottom of the page.
To initiate the update:
1. If your Poly firmware is lower than the current firmware version listed above, then please connect Poly to a wireless network with access to the Internet (please ensure that your P-status light is displaying a solid colour – this means that it is connected to a network).
2. Poly will then begin to search for an update and automatically download the available firmware.
3. Please leave your device connected for twenty-minutes whilst the download completes.
To complete the update:
1. Turn off Mojo/Poly and wait until the P-status light goes out
2. Turn on Mojo/Poly and then wait 20-minutes
3. Turn off Mojo/Poly and wait until the P-status light goes out
4. Turn on Mojo/Poly
5. Forget Poly as a Bluetooth device on your connected device
6. Switch off the Bluetooth on your device (to clear the cache)
7. Turn on Bluetooth and pair with Poly again.
1.0.26 update includes:
1. Important functionality enabling the imminent release of GoFigure
2. A security update which includes the ability to create a Hotspot password
3. A fix for Poly appearing multiple times in DLNA control apps
4. When playing back via Bluetooth this is now indicated by the P-status flashing purple
5. The config button can now be used to select between the various playback modes.
1.0.17 update includes:
1. Important functionality enabling GoFigure iOS app control
1.0.10 update includes:
1. Updates and improvements to the way that Poly handles and serves Cover Art.
2. m4A playback via MPD has been added
3. The DLNA/MPD database creation has been reformulated for stability.
4. Indication to when Poly is performing an over-the-air, database, or Cover Art update. Now Poly’s P-status LED will cycle through Red, Green and Blue until the task has been completed.
5. Improvements to the charge status indicator. When Poly is charging a white LED will be shown, when charging is complete a blue LED will be shown. Please note that it can take up to 45mins for Poly to indicate a full battery if connected to a charger when full.
1.06 update includes:
1. Wi-Fi MAC and Bluetooth MAC address visibility on the Access Point page
2. Access Point Wi-Fi Manage Connections page, delete networks resolved plus Access Point special character handling for Wi-Fi SSID and password added
3. DLNA FLAC file gapless playback
4. Restart of services when joining a new network
5. SSID 32 characters and password 63 characters max
6. Router DLNA services visibility
7. AirPlay updates
8. SD card database management improvements: If the SD card has space for database then the database will be stored on the SD. Therefore, Poly will only index the SD once, if the content has not changed. If there is insufficient space on the SD card, then the database will be created each time Poly is switched on. |
|
楼主: le413
粤公网安备 44030602000598号 耳机大家坛、www.erji.net、网站LOGO图形均为注册商标 
IP卡
狗仔卡
发表于 2018-4-11 07:09
显身卡