哪位moode大神帮看看tidal connect问题

luis001

硬件树莓派3A+，系统moode 8.3.9 64位，听歌airplay全正常，就是ssh安装tidal connect出问题，如图，多谢啦

luis001

有知道的大神吗

luis001

zheng_nick

我测试下来能正常使用的只有PICORE+TIDAL CONNETCT

luis001

zheng_nick 发表于 2024-3-30 20:22
我测试下来能正常使用的只有PICORE+TIDAL CONNETCT

picoreplayer是不是必须通过有线网连接才能打开wifi？我的树莓派3A+没有有线网口

zheng_nick

我的是3B+，3A没有用过，应该不会吧

zheng_nick

lovehifi/tidalconnect-picore
--唯一能正常使用的

luis001

zheng_nick 发表于 2024-3-30 22:31
lovehifi/tidalconnect-picore
--唯一能正常使用的

树莓派3A+，安装32bit的picore9，安装lovhifi的tidal插件。手机tidal app可以搜到tidal connect，但点击没反应无法连接

zheng_nick

换成8

luis001

zheng_nick 发表于 2024-3-31 09:40
换成8

picore的8版本在树莓派3A+上无法运行

Jiuwuerqii

看报错嘛 shell启动脚本，第六行的配置文件没有找到，一步步往上定位

clark8888

https://github.com/lovehifi/tidalconnect-picore

Tidal Connect for PiCorePlayer
piCorePlayer (piCorePlayer v8.2.0) is a very small Music OS, only about a few tens of MB in size, and operates entirely on RAM. Installing Tidal Connect on piCorePlayer can significantly increase the size of your OS, adding about 100MB. If you're not too concerned about that, give it a try. This version only supports 32-bit.

Install Tidal Connect.

wget -O - https://raw.githubusercontent.com/lovehifi/tidalconnect-picore/main/install.sh | sh

After installation, you need to perform the following steps:

Open the Tweaks page and add the following

In the tweaks page, Shairport-sync to Yes.

Add User command #1:

/usr/local/etc/init.d/avahi start

Add User command #2:

/home/tc/Tidal-Connect-Armv7/tidal.sh start

Click button Save, reboot your system.   群友说好像是要借助airplay实现，不懂

luis001

clark8888 发表于 2024-3-31 17:48
https://github.com/lovehifi/tidalconnect-picore

Tidal Connect for PiCorePlayer

咱俩可能是在同一个群，哈哈哈

zheng_nick

https://github.com/GioF71/tidal-connect,这个试一试呢

luis001

已放弃，入手了wiim mini，哈哈哈，tidal connect终于run起来了