SMART AM40（RK3399）刷Armbian+安装moOde

cqzhangjunhua

AM40（RK3399）介绍：

规格参数

AM40整机为 主机和OPS扩展两部分

AM40（包括主机和OPS扩展两部分）的宽度230mm、长度240mm、高度58mm。

整机接口： 双USB3.0+千兆有线网口 + HDMI1.4 + TF卡口 + OPS接口

OPS扩展：四个USB2.0 + HDMI2.0 + 6个COM口

部件名称               芯片型号                 备注说明

CPU                    RK3399                   Dual-core A72+Quad-core A53, 64 bits, 2GHz;Mali-T864 GPU

RAM                                             4 GB DDR3L SDRAM

Flash                                           32G eMMC 5.1

Ethernet              RTL8211F                  RJ45 Gigabit Ethernet

WIFI+BT        M2-EKEY-PCIE RTL8822BE           802.11AC/ABGN PCIE WLAN WITH BLUETOOTH 4.2 SINGLE-CHIP CONTROLLER
                                                  芯片型号: AP6536S（注：自己在网上查的）
USB 2.0                                         USB 2.0[ops] * 4

USB 3.0                                         USB 3.0 [on board] * 2

HDMI                                            HDMI 1.4[(1920 × 1080) on board，由DP转的] + HDMI 2.0[ops 4k@60Hz]

power        12–19V DC at 2.5–1.6A            PORT size： 5.5 * 2.5 [ops; main]；3.0 * 1.1 [on board; hided]

电源测试5V2A、12V1A也能启动，已有5521接口电源的，可以购买5521母转5525 DC转接头。

AM40整机（主机和OPS扩展两部分）在闲鱼上售价在120-160元之间。


安装所需软件分享如下

https://pan.baidu.com/s/1Ux1py39IpaCW9hCkiTDf4g

密码：1234


一.安装armbian系统


   1.1.镜像文件：   


      Armbian_24.11.0_rockchip_smart-am40_bookworm_6.1.112_server_2024.10.02.img 烧录到tf卡，


          注：本固件下载地址：https://github.com/ophub/amlogic-s9xxx-armbian/releases


   1.2.将镜像文件写入TF卡（TF卡最好大于8g）


     在windows上用DiskGenius将TF卡分区格式化


     首先在DiskGenius左方框中选择要分区的TF卡，要选正确、要选正确、要选正确（重要的事提醒三次），


右键点击，弹出菜单，选择“快速分区”，在弹出的快速分区框，选择分区类型：MBR；选择分区数目：自定义1个分区；


在右上方的高级设置选FAT32，然后点击“确定”按钮。等到完成后，关闭DiskGenius。


      打开Win32DiskImager，这时头上方的“设备”栏里有TF卡的盘符（如果只有一个TF卡插在电脑上，只要显示盘符就可以不管，


否则要选正确的盘符）。点击“映像文件”栏右边的文件夹符号，选择要写进tf卡的img文件，文件选好后，


“任务进度”条下面的“写入”按钮可见，点击“写入”按钮，开始写入，等到写完时会弹出“写入完成”框，点击“OK”按钮，退出Win32DiskImager。      


   1.3.启动armbian


     将TF卡插入AM40前面面板右下角的的TF卡槽里，插上网线、电源线，按下电源开关。


打开浏览器，登录路由器的管理页面，查看新增的设备名称：armbian及其IP地址。


    打开PuTTY软件，并在地址栏输入armbian的IP地址，点击打开


    在login as:输入：root


    输入密码：1234


显示：


Create root password:


输入: 67773240


显示


Retype new password:


输入：67773240


显示


1) bash
2) zsh


输入：1


显示


Please provide a username (eg. your first name):


输入：cqzhangjunhua


显示


Create user (cqzhangjunhua) password:


输入：67773240


显示


Retype new password:


输入：67773240


显示


Detected timezone: Asia/Shanghai


Set user language based on your location? [Y/n]


输入：y


显示


At your location, more locales are possible:


1) bo_CN                    3) zh_CN.UTF-8
2) ug_CN                    4) Skip generating locales


输入：3


显示

    _             _    _              ___  ___
   /_\  _ _ _ __ | |__(_)__ _ _ _    / _ \/ __|
  / _ \| '_| '  \| '_ \ / _` | ' \  | (_) \__ \
/_/ \_\_| |_|_|_|_.__/_\__,_|_||_|  \___/|___/

v24.11.0 for RK.Smart-Am40 running Armbian Linux 6.1.112-ophub


Packages:     Debian stable (bookworm)
IP addresses: (LAN) 192.168.5.74
Performance:


Load:         13%              Up time:       4 min
Memory usage: 5% of 3.77G
CPU temp:     28°C             Usage of /:    12% of 15G


Commands:


System config  : sudo armbian-config
System monitor : htop


root@armbian:~#


完成


armbian-apt


输入：3


apt update               


apt upgrade




   1.4. 连接无线网络、设置有线网卡和无线网卡的IP地址为静态IP


输入


armbian-config


选择：Network


选择：WiFi


在显示的wifi列表中选择一个wifi


输入登录此wifi的密码：


点击<OK>


在wifi列表框里，被选中的wifi名字前有 * ，则表示连接wifi成功，然后退出。


选择：IP


选择：eth0


选择：<Static>
               
在弹出的设置框里按照以下输入


Address: 192.168.5.160


Netmask: 255.255.255.0


Gateway: 192.168.5.1


DNS：192.168.5.1


点击<OK>


当看到路由器里armbian的有线地址变成192.168.5.160


关闭PuTTY，用IP192.168.5.160重新登录PuTTY


用同样方法，将无线网卡wlan0的IP地址，设置为静态IP: 192.168.5.88


二. 安装moOde

   2.1 修改系统源

   nano /etc/apt/sources.list

将原来的内容用#注释掉，把以下内容添加到文件尾部

deb https://mirrors.tuna.tsinghua.edu.cn/debian/ bookworm main contrib non-free non-free-firmware

deb-src https://mirrors.tuna.tsinghua.edu.cn/debian/ bookworm main contrib non-free non-free-firmware

deb https://mirrors.tuna.tsinghua.edu.cn/debian/ bookworm-updates main contrib non-free non-free-firmware

deb-src https://mirrors.tuna.tsinghua.edu.cn/debian/ bookworm-updates main contrib non-free non-free-firmware

deb https://mirrors.tuna.tsinghua.edu.cn/debian/ bookworm-backports main contrib non-free non-free-firmware

deb-src https://mirrors.tuna.tsinghua.edu.cn/debian/ bookworm-backports main contrib non-free non-free-firmware

deb https://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware

deb-src https://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware

保存退出

nano编辑软件保存方法：ctl+o, enter, ctl+x

nano /etc/hosts

把以下内容添加到文件尾部

20.205.243.166 github.com
140.82.116.4 github.com
140.82.116.3 github.com

保存退出

   2.2. 添加 armbian 源

wget https://apt.armbian.com/armbian.key -O key

gpg --dearmor < key | tee /usr/share/keyrings/armbian.gpg > /dev/null

chmod go+r /usr/share/keyrings/armbian.gpg

echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/armbian.gpg] http://apt.armbian.com $(lsb_release -cs) main $(lsb_release -cs)-utils $(lsb_release -cs)-desktop" | tee /etc/apt/sources.list.d/armbian.list

   2.3.添加moOde-player源

wget https://dl.cloudsmith.io/public/moodeaudio/m8y/setup.deb.sh

chmod +x setup.deb.sh

./setup.deb.sh

如果显示

Executing the  setup script for the 'moodeaudio/m8y' repository ...

   OK: Checking for required executable 'curl' ...
   OK: Checking for required executable 'apt-get' ...
   OK: Detecting your OS distribution and release using system methods ...
^^^^: ... Detected/provided for your OS/distribution, version and architecture:
>>>>:
>>>>: ... distro=debian  version=12  codename=bookworm  arch=aarch64
>>>>:
NOPE: Checking for apt dependency 'apt-transport-https' ...
NOPE: Updating apt repository metadata cache ...
Failed to update via apt-get update
E: Type '$deb' is not known on line 1 in source list /etc/apt/sources.list
E: The list of sources could not be read.
^^^^: ... Failed to update via apt-get update - Context above (maybe no packages?).
!!!!: Oh no, your setup failed! :-( ... But we might be able to help. :-)
!!!!:
!!!!: You can contact moodeaudio for further assistance.
!!!!:
!!!!: URL: https://github.com/moode-player
!!!!:

则表示无法连接到 https://github.com

只好在其他时间在试

必须要等到显示以下内容

root@armbian:~# ./setup.deb.sh
Executing the  setup script for the 'moodeaudio/m8y' repository ...

   OK: Checking for required executable 'curl' ...
   OK: Checking for required executable 'apt-get' ...
   OK: Detecting your OS distribution and release using system methods ...
^^^^: ... Detected/provided for your OS/distribution, version and architecture:
>>>>:
>>>>: ... distro=debian  version=12  codename=bookworm  arch=aarch64
>>>>:
NOPE: Checking for apt dependency 'apt-transport-https' ...
   OK: Updating apt repository metadata cache ...
   OK: Attempting to install 'apt-transport-https' ...
   OK: Checking for apt dependency 'ca-certificates' ...
   OK: Checking for apt dependency 'gnupg' ...
   OK: Checking for apt signed-by key support ...
   OK: Importing 'moodeaudio/m8y' repository GPG keys ...
   OK: Checking if upstream install config is OK ...
   OK: Installing 'moodeaudio/m8y' repository via apt ...
   OK: Updating apt repository metadata cache ...
   OK: The repository has been installed successfully - You're ready to rock!

下面继续

nano /etc/apt/sources.list.d/moodeaudio-m8y.list

将原有内容用#注释掉

添加以下内容

deb [signed-by=/usr/share/keyrings/moodeaudio-m8y-archive-keyring.gpg] https://dl.cloudsmith.io/public/moodeaudio/m8y/deb/raspbian bookworm main
deb-src [signed-by=/usr/share/keyrings/moodeaudio-m8y-archive-keyring.gpg] https://dl.cloudsmith.io/public/moodeaudio/m8y/deb/raspbian bookworm main

保存退出

   2.4. 添加upmpdcli源

   2.4.1. 添加秘钥

cd /usr/share/keyrings

wget https://www.lesbonscomptes.com/pages/lesbonscomptes.gpg

   2.4.2. 添加源列表

cd /etc/apt/sources.list.d

wget https://www.lesbonscomptes.com/upmpdcli/pages/upmpdcli-rbookworm.list

   2.5. 添加raspberrypi源

cd /usr/share/keyrings

wget https://archive.raspberrypi.org/debian/raspberrypi.gpg.key

cd /etc/apt/sources.list.d

nano /etc/apt/sources.list.d/raspi.list

添加以下内容

deb [signed-by=/usr/share/keyrings/raspberrypi.gpg.key] https://mirrors.tuna.tsinghua.edu.cn/raspberrypi/ bookworm main untested

保存退出

apt update

上传moode-player_9.0.0-1moode1~pre1_all.deb文件到/home

cd /home

apt install -y ./moode-player_9.0.0-1moode1_pre1_all.deb

apt install -y ./moode-player_9.0.0-1moode1_pre6_all.deb

  注：moode-player_9.0.0-1moode1_pre1_all.deb的

        下载地址：https://cloudsmith.io/~moodeaudio/repos/m8y/packages/

如果出现bluez-firmware安装错误，执行下面命令

dpkg -i --force-overwrite /var/cache/apt/archives/bluez-firmware_1.2-4+rpt10_all.deb

注意根据实际情况填写文件的-4+rpt10_all.deb部分

继续安装

apt install -f

最后显示

Setting up moode-player (9.0.0-1moode1~pre1) ...
** Basic optimizations
/var/lib/dpkg/info/moode-player.postinst: line 57: dphys-swapfile: command not found
/var/lib/dpkg/info/moode-player.postinst: line 58: dphys-swapfile: command not found
** Systemd enable/disable
** Create MPD runtime environment
** Set permissions for D-Bus (for bluez-alsa)
** Set permissions for triggerhappy (to execute ALSA commands)
** Create symlinks
** Create logfiles
** Set permissions
** Create database
GnuTLS: The TLS connection was non-properly terminated.
Unable to establish SSL connection.
Traceback (most recent call last):
  File "/var/www/util/station_manager.py", line 749, in <module>
    check_result = mgnr.check_env(args.do_import or args.do_diff, args.logopath)
                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/var/www/util/station_manager.py", line 129, in check_env
    return_code = self.check_backup(return_code)
                  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/var/www/util/station_manager.py", line 144, in check_backup
    with ZipFile(self.backup_file, 'r') as backup:
         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/lib/python3.11/zipfile.py", line 1302, in __init__
    self._RealGetContents()
  File "/usr/lib/python3.11/zipfile.py", line 1369, in _RealGetContents
    raise BadZipFile("File is not a zip file")
zipfile.BadZipFile: File is not a zip file
** Initial permissions for certain files. These also get set during moOde Worker startup
** Establish permissions
** Generate alsaequal binary
** Misc deletes
** Set permissions for pam and sudoers drop files
** Setup config files
sed: can't read /etc/X11/Xwrapper.config: No such file or directory
moode-player install finished, please reboot
Setting up chromium-browser (1:129.0.6668.100-1~deb12u1+rpt1) ...
Processing triggers for php8.2-cli (8.2.24-1~deb12u1) ...
Processing triggers for dictionaries-common (1.29.5) ...
Processing triggers for php8.2-fpm (8.2.24-1~deb12u1) ...
Processing triggers for libc-bin (2.36-9+deb12u8) ...
root@armbian:/home#


这表示安装完成，需要重启系统

reboot

重新登录


在电脑端的浏览器地址栏输入：192.168.5.160

当弹出Armbian Player网页时，点击右上角的m菜单，选择Configure，

弹出 Configuration Setting 网页，点击 Audio

弹出 Audio 网页

这才表示moOde安装完成。

catyy0769

弹出 Configuration Setting 网页，点击 Audio

弹不出 Audio 网页，是在装过程有网络管理版本更新，按键Y，更版本就可以了。

zheng_nick

收藏了，谢谢，ARM通用教程