N年了，坛子上信息没有做更新，陆续编辑一下。
常规产品信息，参见淘宝店：
http://shop34123584.taobao.com/
线材继续提供定做业务！
以下信息于2005年发布，暂时保留！
首先感谢大家对我的支持和经验分享。
我所做的线材主要以发烧线材为主，为了追求更高的性价比，全部使用进口发烧线材（如有例外，我会特殊说明）。为了保证信号的高度传真，所用的焊锡都是WBT 4％含银锡；为了保证焊接温度的一致性，焊接工具用的是德国威乐和日本白光的调温焊台；为了避免焊点氧化而劣化音质，都用优质热溶胶进行封装；为了减少声波对线材的震动而影响声像定位，大部分线材都加装了全新的优质避震网，当然也增加了视觉冲击力。
和大家一样，都是发烧一族。我烧龄已10年有余，平素喜欢焊机，曾经焊过仿音乐传真A1，OP627BP＋BUF634前级，LM3875双功放后级等，喜欢摩机，DIY也是一种乐趣！所谓发烧之路漫漫其修远兮，吾将上下而求索。但是我们要明白，音乐欣赏才是最终的归属。发烧无止境，所以一定要适可而止。
线材和器材一样，没有最好，只有更好！也许性价比高、适合自己的就为好。
认真做线，才能把线做对；用心做线，才能把线做好。用心做线是我的一贯宗旨。
产品目录：
1）2×RCA to 2×RCA（双莲花头信号线，最常用的一种，接驳音源和耳放）；
2）3.5 to 2×RCA （立体声转双莲花头信号线，适用于随身听、MP3、声卡等音源接驳耳放）；
3）6.35 to 2×RCA （TRS『即大三芯』接驳声卡等音源和耳放）；
4）3.5 to 3.5 （立体声对录线，适用于随身听、MP3、声卡等音源接驳mini耳放）；
5）3.5 to 3.5母头 （立体声延长线，适用于随身听、MP3、声卡等音源直驳耳机）；
6）4P to 4s（3.5立体声左右声道各增加75欧电阻，以接近4s的效果，也就是低阻转高阻。对普通耳机的整体效果提升也极大）；
7）RCA to RCA同轴线 XLR to XLR平衡数字线（接驳声卡、CD机数字输出到解码器）；
8) 2PIN TO RCA同轴线（接驳高品质CDROM、DVDROM到解码器）；
9）AP192、1212、0404、MIAMIDI等高端专业声卡用信号线（接驳声卡和耳放）；
10）专业声卡用转换头（一般随机附带品容易造成声音的瓶颈）；
11）2×TRS to 2×TRS 和 2×XLR－F to 2×XLR－M （平衡器材互连信号线）；
12）耳机升级线（用于HD580、600、650、HP1000、DT770、DT880、DT931、271s、240M/DF等高端耳机的升级线）；
13）电源线（用于CD机、解码器、耳放等，在高中低频某些方面改善较明显）；
14）2×RCA to 6.35母座（只有RCA输出的音源直推耳机）；
15）4×香蕉插 to 6.35母座（胆大心细的烧友用功放直推耳机）；
16）喇叭线；
17）应烧友的要求，制作异型线材；
18）线材、耳机线的维修。
现在的帖子可能是耳坛最长的帖子。
早期的东西主要集中在二手区，有兴趣的话，也可以看一下：
http://www.erji.net/read.php?tid=95135&keyword=
如果兄弟们定做线材，可以根据自己的实际需求，比如声音取向，线材长度，外观要求等在帖子里跟贴或论坛短信都可以。
我的所在地是天津，手机是13920402756（24小时开机），打电话或短信都可以找我；
QQ： 785111903 和357055894
msn：zhangcunxi@hotmail.com
Email: zycable@foxmail.com
谢谢大家！
First of all, I would like to thank our fellow audiophiles, for your supports and the sharing of experiences.
I make mainly HIFI audio interconnect cables. To achieve better price performances ratio, all the cables I used are imported. (I will specify if otherwise) To keep transmitted signal as fidelity as possible, I only use WBT 4% silver solder; on top of that, I use WELLER or HAKO solder gun, to avoid any oxidation and distortion, materials are sealed with thermosol. Lastly, most cables I made have expandable sleeve, this reduces the noise effect due to vibrations of cables, and enhance the expressive of them.
Being an audiophile, I’ve been into this hobby for more than 10 years. I soldered a clone Music Fidelity A1 before, OP627BP+BUF634 pre-amp and LM3875 bi-amp etc. I love to modify equipments and the satisfactions from DIY are simply incredible. Lastly we have to realize that, music is what we enjoy not equipments. There is always more expensive system, we should never overspend.
Cables are like equipment, there is no best cable, and all you need is a high performance ratio cables which fit your taste.
I believe a working cable needs only technique and carefulness. However an excellent cable requires commitments and enthusiasms. And making excellent cables that make my fellow audiophiles enjoy their music better is my ultimate goal.
Categories:
1) RCA to RCA (commonly used for the interconnection between source and amplifier)
2) Mini to RCA (mini plug to RCA. For the interconnecting between portable CD/MD/MP3 players, sound card and amplifier)
3) TRS to 2×RCA (TRS jack to RCA. For the interconnection between sound card and amplifier)
4) Mini to Mini (For the interconnection between portable gear and mini amplifier)
5) Mini to mini jack (stereo extension cable, for the connection between source and earphones)
6) 4P to 4S (Install 75Ω resistor for both right and left channel. This will make er4p sound close to er4s. Adding impedance will also enhance the performance of normal headphones)
7) RCA to RCA coaxial, XLR balanced digital audio cable (for the interconnection between sound cards, CD players’ digital output to DAC)
8) 2Pin to RCA coaxial cable (for the interconnection between CD/DVD ROM to DAC)
9) AP192, EMU1212/0404, MIA MIDI professional sound card cables. (for the connection between sound cards and amplifier)
10) Professional sound card adapters (to overcome bottleneck cause by the stock cable accessories)
11) TRS to TRS & XLR (balanced interconnection cable)
12) Headphones upgrade cables (for HD580/600/650, HP1000, DT770/880/DT931/271s,240M/DF etc.)
13) Power cord (For CD player, DAC, amplifier)
14) RCA to TRS jack (For sources with only RCA output)
15) 4×plugs to TRS jack (For those who want to use their amplifier to drive headphones)
16) Speakers cable
17) DIY cables by requests
18) Cables and headphones repair
The last thread I used is probably the longest one in www.erji.net.
Most cables I made in early days are in the sell forum. You can take at look at http://www.erji.net/read.php?tid=95135&keyword= if interested.
Always wanted to own a true Hifi cable? Always found them too expensive for your wallet? Now is your chance!
Here you can request a price quotation for your own custom cable. Please tell me as much as possible specifications.
Like it says: If you can dream it, I can build it!
Contract me:
Feel free to contact me with any of your questions or remarks through PM or just simply reply this thread.
I’m located in Tianjin, China.
Cell: 86-0-13920402756 (it is on 24/7)
QQ: 785111903 &357055894
msn：zhangcunxi@hotmail.com
Email: zycable@foxmail.com
Thanks for your inquiry.
|
粤公网安备 44030602000598号 耳机大家坛、www.erji.net、网站LOGO图形均为注册商标 
IP卡
狗仔卡
发表于 2005-6-10 20:00
收藏
分享
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
兄弟好~
楼主
