|
大侠,您好,固件升级说明我在官网找到了。
The latest Poly firmware version is 1.017. You can confirm the firmware version of your Poly by navigating to Access Point Mode and scrolling to the bottom of the page.
Poly will silently search for an update when your device is switched on and connected to a wireless network. If you are aware of an update being rolled out via social media we advise that you leave your Mojo/Poly switched on and connected to a wireless network with internet connectivity for at twenty minutes.
Following the update please switch off your Mojo/Poly and then switch the units back on again and wait for twenty minutes. Following this the update will be complete.
但现在问题是我用针扎一下config孔,现在语音提示是access point mode,进入ap模式,然后我进入到poly-@@#@@的那个ssid中,能看到现在的固件版本号是1.06,然后切回到wifi下,也没看到他20分钟升级成功,半个小时后,进去看还是1.06,没有变成1.017
另外提一个我遇到的问题,我现在wifi设置成功了,在手机中也能找到poly,但你们说的软件我还是登陆不了,登陆界面需要名称,端口,密码,也按照大家说的名称那边写成poly.local,端口是6600,密码空着,可是连接的时候提示连接失败,试过很多次了。郁闷啊。
|
|